4-piece & 6-piece kit support

Mud Flaps & Optional Clear PPF

Designed for 2025–2026 Model Y Juniper. Installation videos, the full bilingual manual, and support for both kit options. Match your Amazon order to the ASIN below.

4-piece kit

ASIN B0HMLNGJTD

4 mud flaps, 12 push clips, and a trim-removal tool. No PPF included.

6-piece kit

ASIN B0H8FM5MS3

4 mud flaps, 2 clear TPU PPF pieces, 12 push clips, a trim-removal tool, an empty spray bottle, and a PPF squeegee.

The 4-piece kit does not include PPF. Skip the PPF video and steps if your kit does not contain film.

No drillingNo screw removalInstallation tool included8 clips used + 4 spare
6-PIECE KIT SHOWN: kit contents6-PIECE KIT SHOWN

REPLACEMENT SUPPORT

2 YEARS

2-Year Limited Replacement Support

For eligible product issues under normal use within 2 years of the original Amazon purchase date, AXIORIDGE provides replacement support after order verification and issue review.

Replacement eligibility is confirmed after review. Keep your Amazon order information and clear photos of the product issue available.

RECOMMENDED AFTER PURCHASE

Register your purchase details

For faster support later, email the ASIN, Amazon order number, and purchase date after your order arrives. Registration is optional and is not required to receive support. It only helps us create a support record for this product.

ASINOrder numberPurchase date
Open email app

No email app configured? Use the copy option with any webmail service.

No review, rating, or feedback is required to receive support.

Enter the ASIN from your Amazon order in the email or copied template.

COVERED

Eligible product issues

  • Material or workmanship defects under normal use.
  • Missing components or clear manufacturing defects.
  • Damage verified to result from an issue with the product itself.

NOT COVERED

Outside replacement support

  • Incorrect vehicle selection or use on vehicles other than 2025–2026 Model Y Juniper.
  • Damage caused by installation that does not follow the provided instructions or videos.
  • Damage caused by accidents, severe scraping, curb or hard-object impacts, or modifications.
  • Normal wear, minor scratches, stains, or cosmetic aging.
  • Installation labor, vehicle paint repair, or indirect losses.

START HERE

Choose the help you need

Use the complete video walkthroughs for installation. Keep the bilingual manual available for a quick step reference.

01

Mud flaps video

Front and rear clip-on installation from start to finish.

Watch guide →
02

Clear TPU PPF video

6-piece kit only. Wet application, positioning, and final edge finishing. Skip for the 4-piece kit.

Watch guide →
PDF

Mud Flaps & Optional PPF Installation Manual

English + Spanish · 14 pages, formatted for mobile viewing.

Download PDF →

VIDEO GUIDES

Follow the full sequence

Watch each guide before installation, then replay the relevant section while you work.

Mud Flaps Installation

Follow the complete clip removal, alignment, and reinstallation sequence for the front and rear mud flaps.

Clear TPU PPF Installation

For the 6-piece kit only: watch the wet-application process for the two rear door corner protection pieces. Skip this video for the 4-piece kit.

QUICK REFERENCE

Installation at a glance

These summaries are reminders, not substitutes for the complete video guide and manual.

Mud flaps

Use the included trim-removal tool and replacement push clips.

  1. Lift the two factory push clips at the installation position.
  2. Align the built-in tab with the factory trim.
  3. Hook the mud flap to the wheel-arch edge and check the contour fit.
  4. Reinsert the supplied push clips and confirm both points are secure.

Clear TPU PPF

For the 6-piece kit only. The black film in the video is for demonstration; the included TPU pieces are clear. Do not wash the vehicle for 72 hours after PPF installation.

  1. Clean the rear door corner and prepare a light slip solution.
  2. Wet the adhesive side and position the clear TPU piece.
  3. Leave a 2–4 mm edge gap around the intended boundary.
  4. Squeegee moisture outward with firm, even pressure.

Installation notice: Product appearance may vary by revision. The installation method remains the same. Stop and contact support if the mounting points do not match your vehicle.

FAQ

Common questions

Which vehicle is this kit designed for?

This page supports AXIORIDGE kits for 2025–2026 Model Y Juniper: 4-piece kit ASIN B0HMLNGJTD and 6-piece kit ASIN B0H8FM5MS3. Match the ASIN on your Amazon order before following the instructions.

Which kit includes PPF?

Only the 6-piece kit includes two clear TPU PPF pieces. The 4-piece kit contains four mud flaps, 12 push clips, and a trim-removal tool; skip the PPF video and steps. The same 14-page English–Spanish manual covers both kits.

Does mud-flap installation require drilling?

No. The front and rear mud flaps use clip-on mounting points. No drilling and no screw removal are required.

How many replacement clips are included?

The kit includes 12 plastic push clips. Eight are used for installation and four are included as spares.

Why is black film used in the TPU installation video?

Black demo film makes the placement boundary easier to see on camera. The two TPU PPF pieces included with the 6-piece kit are clear. The 4-piece kit does not include PPF.

What if the product appearance is slightly different from the video?

Product appearance may vary by revision. The installation method remains the same. If the mounting points do not match your vehicle, stop and contact support before continuing.

What should I include when contacting support?

Please include your Amazon order ID, purchase date, product ASIN, vehicle model year, the FL/FR/RL/RR position involved, and clear photos of the part and installation area.

How does the 2-year replacement support work?

AXIORIDGE provides limited replacement support for eligible product issues reported within 2 years of the original Amazon purchase date. Send the ASIN, Amazon order number, purchase date, and clear photos so we can verify the order and review replacement eligibility.

Is purchase registration required for support?

Registration is optional and is not required to receive support. It only helps us create a support record for this product. No review, rating, or feedback is required to receive support. Please keep your Amazon order information available as proof of purchase.

STILL NEED HELP?

Send the details once. Make troubleshooting faster.

Include your Amazon order ID, the ASIN from your order, vehicle model year, part position, and clear photos.

Contact AXIORIDGE support